12/31/2013

You Know It's Cold Out Here

Snowblowing the driveway one morning.  I got bored so i decided to do a time lapse and film it with my GoPro Camera.

You know it's cold out here

http://youtu.be/a6IMHr3x4mM

Hair Bows on Etsy

A few weeks ago Karrie created an Etsy page where she is trying to sell her homemade hair bows.  Here's her homepage with the hair bows she is selling.  As of today she only has this one listing for some hair bows that look like this:
bowtique glam, hair bows, etsy, homemade hair bow, for sale

But eventually she is planning on having a bunch of different listings on that homepage so that people can choose between different styles.  The only bad thing is that right now we are real busy with everything else that we don't have a lot of time to work on it.  Her job is to make the bows and i'm in charge of trying to get the internet traffic to her Etsy page.  Right now i'm focusing on Pinterest and it seems to be working well.
cute homemade hair bow for sale, etsy hair bow

Here's a quick video i made and put it on Youtube to try and get some more traffic to her Etsy site.

Homemade Hair Bow

http://youtu.be/RxXRAm9D53s

We even had Kyla model some before she left for California.
kyla, hair bow, model, glam, kids hair bow, for sale

We are just starting out and are seeing how it goes.  Like i said, eventually there should be several different listings on that homepage with all different types of bows that she makes.
cheap homemade hair bows, USA

Right now the bows are for sale for $6 each plus shipping.  There are lots of other bows for sale on Etsy for something like $18, but it seems like a lot of people selling stuff there are almost a "business".  We just need to get more listings and more followers, then who knows.

how to make hair bow, easy hair bow, homemade, diy

Looks like the ribbon rack that i made for her arts and crafts room is going to get a lot of use.
hair bow, ribbon rack, arts and crafts

12/27/2013

Replace Room Light with Fan


Several months ago Karrie and I went to an auction which specialized in home building materials. We weren't planning on getting a whole lot, but ended up getting quite a bit of stuff for our house. I'll have to write a separate blog post about that later, but first I want to show one thing we did get, which was a new ceiling fan.  This is the fan we've had in her bedroom for about a year.  It had a small motor and was loud when it was on.
replace old ceiling fan, wire, how to, attach, install

It was actually a small ceiling fan that was originally located in one of the spare bedrooms.  It used to be all white but I painted it this brown color and then i flipped the blades over so now the white blades are facing the ceiling.  I tried several times to make a different light shade but nothing seemed to look good in our room.

Here's the fan we got at the auction. Karrie won the bidding on it for something like $30 or $35.  It was a nice large 52 inch fan with a big electric motor and light.  I liked the larger electric motor because that meant it should be quieter when it was running.  Plus the blades were a lot larger which meant that it could be run at lower speeds.
52" aged iron ceiling fan, auction, bid, price

It's kind of difficult to explain but my plan was to make a three room switch of 2 fans and 2 lights.  I would put the new fan in our room, move the old fan to the spare bedroom, and move that light to Karrie's arts and craft room. The ceiling light that was in that room was very old get thrown out.

So the first step was to remove the ceiling fan from our bedroom.  As you can see it was a jumble of wires, but not too complicated.  The hard part was attaching the fan bracket and feeding the wires through the center pipe.  I took some pictures in case I forgot how it was all wired together.
ceiling fan wires, how to wire, power, negative, neutral

After I removed the old fan I was left with just this, a metal bracket and a positive and neutral white and black wires.
wires from ceiling light, power, check, safety

Then i took all the new fan pieces out of the box.  It was a little more complicated than I thought.  I had to attach each bracket to the fan housing and then attach each blade to the bracket.  The light shade then attached to the bottom and wires had to be run to the light bulbs.
assemble ceiling fan, light, blades, screw, parts

I figured that it would be easier though before I did all that, to try and attach the fan housing to the ceiling first.  That way I wouldn't have to be lifting the weight of the entire fan, just the main fan motor.  This was definitely the most difficult part, having to attach the bracket and then wire everything together before permanently attaching the motor to the ceiling bracket.  All while holding this thing above your head with 1 hand.
how to hang a ceiling fan, wire, attach, trick

Then I went into the spare bedroom and removed the old ceiling light.  Here's the old light that we got rid of.
remove old ceiling light, fixture, replace

And this was the newer light that we would be moving to Karrie's arts and crafts room.  This job was much easier and much lighter.  
install new ceiling light, make room look new

All I had to do was connect white to white and black to black.
how to wire a ceiling light, black wire, white wire, ground

And i didn't have to do it one-handed, the fixture was light enough to be held up by the wires as i worked.
safe way to wire ceiling light, bedroom

The last step was to attach the old fan in place of where I moved the ceiling light.  This too was a little bit difficult because of the weight of the fan.  It gets heavy when you're holding your arms up above your head for 10 minutes while trying to twist together some wires.  But finally I got everything attached and in place.
old ceiling fan, new ceiling fan

Here's what the new fan and light looks like in our bedroom. I thought the 52" fan blades would be too large but it wasn't, it's perfect for our bedroom.  Charlie doesn't seem to mind either and the motor is very quiet at low or medium speed.
new ceiling fan in bedroom, size of fan in room, space, size, speed

12/26/2013

DeWalt Miter Saw Cart

A few weeks ago I wrote about the new miter saw that I bought.  It was a real nice 12" DeWalt miter saw that I got from Lowe's on sale and with a 20% off coupon.  
12" dewalt miter saw, table saw,

Until this point I just kept the miter saw on one of the workbench in my basement.  The problem with keeping it on the workbench is first that it takes up a lot of space and second that it's difficult to cut longer boards.  Anything over a few feet is difficult to support the board on the small miter saw and even harder to cut it when there's not a lot of space.  My brother-in-law John has a real nice miter saw stand that he built using plans from the New Yankee workshop.  That miter saw stand was one of Norm's all-time most popular projects on the show.
norm abram miter saw stand, build plans, how to, job site stand

Unfortunately I didn't have that much space in my basement to build a stand that large. I needed something simple yet strong and something that would collapse down and take up just a small area.   So I looked online and saw several good ideas but nothing that really fit with what I wanted to do. Also it needed to be on wheels so that I could roll it out of the way when I didn't need it.  So after several different drawings and designs I finally had a rough idea and drew it on Google SketchUp.
google sketch up, miter saw plans, build, dimensions

Here's the Google SketchUp files in case you want to download them:
Here it is from another angle.
download google sketch up drawing, saw stand, folding

You can sort of see from the drawing that it wasn't a fully completed idea.  I had the basic thought and shape of how was all going to work but not all of the finer details.  I didn't know how the arms would be supported and also I didn't know how they would sit on the table to align with the miter saws back-plate.  I made a lot of alterations while i was building it and figured that it would come together as i went along.
sketch miter saw, idea, shop vac, base plate

As with most of my jobs I used the cheapest wood I could find which was 2x3's and 1x3's.   I cut them all to length using the actual miter saw that I was building stand for in the first place.  The new miter saw is really great it makes real precise cuts and takes much less time than the old hand powered one I used before.
how to build a wood miter saw stand, 2x4, cheap, build, plans

I was connecting all the boards using drywall screws and glue.  Here's the first marks i made to get the screws spaced evenly at the joint.
screw hole location, 2x4, strong, marks

Instead of doing that for every corner I made a quick pattern on a piece of Tyvek.  This was just a quick easy way to space out the screws which I would use to attach the boards, along with wood glue, so i didn't have to measure every time.
tyvek template, screw hole template, location

This is the basic 2x3 frame that I made.  It was very simple yet strong.  I calculated the overall height based on the fact that I would add wheels to the bottom of this, so about 3" higher.
miter saw stand frame, wood, 2x3, 2x4, screw

Next I added 1x3's around the center and 1/4" plywood for the top.  I stood it up and put the saw on to see how it would look.  Not bad so far.
basic miter saw stand frame, framework, plywood

The next difficult step was an determining how to attach the collapsible arms.  I knew they would swing out vertically and I figured that hinges would be the most stable solution.  So I attached some old door hinges i had to each side.  .
folding miter saw arms, hinged, hinges, colapse, storage

Then after measuring the height of the base-plate on the miter saw a determined that 2x4 would be a good start.  The height of the fence was actually a little bit higher but I wanted to add white melamine on the top of the fence so that would would be able to easily slide back and forth.  Here's the 2x4 that i screwed into the hinges.
test fit miter saw, stand, table saw, form, table

To position the miter saw on the top of the stand there are four holes in the base of the saw.  I traced out the outline of the saw and marked the position of the holes.  I drilled the 4 holes into the plywood and 2x3's large enough to fit the aluminum rod i would be using.
miter saw lock bars, base, pipe, holes

Here is what those aluminum rods look like when they are set in place.  This made for a solid positioning system and what is even better is that the bars are removable.  If i had used screws or small diameter post then the saw would be able to move around, but by using the aluminum bars, which are the same diameter as the holes, the saw was almost locked into place and doesn't move at all.
aluminum rod, lock for miter saw, dewalt, how to

Here's all 4 of the bars I used. After cutting them I used the rasp to round over the corners.
base plate locking pins, dewalt miter saw, trace shape

I was always planning to attach wheels to the base of the stand.  These were the wheels I was originally planning on using because they were just the 4 that I had lying around.  Although after testing them out I realized that they might not work.  They were too small and the miter stand was a little too wobbly.  Also they did not have any way to lock in place while i was cutting.
wheels for miter saw, move, organize, save space

This is the start of building the folding arms.  These two pieces would be the back rest to one of the sides.  The 1x3 pine was for support and the melamine on the left would allow the board to slide easily.
glue melamine, sliding, woodworking, miter saw stand

Here's what it looked like when I was gluing both of them together.  It took several clamps because I didn't use any nails or screws and i didn't want any gaps. 
wood, clamps, glue

Next I started working on the second part of the arms, the horizontal base pieces.  This process was basically the same as the backer pieces but I used larger boards and larger sections of melamine,
melamine covering wood, finishe

After everything had finished gluing I used my belt sander to remove any sharp corners and even the boards out.  The heavy belt sander made quick work of making all the boards flush with each other.
poerter cable belt sander

This was a small section of 1x3 that I needed to glue into place for joining the arms to the 2x4 which attached to that hinges.  It's served as a support and gave more of a surface area for gluing.  It also helped to make sure the arms were horizontal to the fence.
cheap 2x4 wood block, jenga

This is what both of the hinged arms look like.  You can see how the frames are made of wood and the surface is the white melamine, which reduces friction on the boards.  Also you can see that I rounded the sharp outside corners of the boards.
folding miter saw hinged arms, build, plans, how to

This was a test run I did to see how the arms would hinge to their horizontal position.  I was still trying to determine how I was going to make the arms work.  I was debating between using a 2x4, a metal pipe, and a type of large hinge which would attach it either end.
miter saw arms, test, how to attach

I ended up using a 3/4" metal pipe.  After drawing a lot of different sketches I figured that the metal pipe was the simplest answer and provide the most strength.  The pipe would be supported by gluing two 1x3 blocks to the arms and stand.  Then i would drill a 3/4" hole in the blocks for the pipe to slide into.
folding arm pipe brace, brackets, miter saw, homemade, build plans

I don't have a picture showing the drilling process but it was actually quite difficult.  I had to cut both of the metal pipes to the length I thought and then use them to determine the location of the 1x3 blocks.  Then after gluing the blocks in place, I held up the pipe and drew a line for the angle at which the pipe intersected.  I then took a 3/4" drill bit and drilled into the block at that angle.  It took quite a bit of time before I got the depth and the angle right.  Also it took even longer using curved wood rasp to open up a hole to allow the pipe to easily slide and lock into place.

After everything was attached in the glue had dried I used the drywall spackle to fill in any gaps.  Also you can see from this picture that I attached two more small blocks at the base where I would store the pipes when the miter stand was folded up.
spackle sheet rock wood 2x4 stand, smooth out before painting

A quicksand and another coat of spackle and I was ready for paint.  I filled in all the jagged edges and countersunk holes I made for the screws.
use lightweight joint compund to fill in screw holes

Here's what it looked like after the first coat of paint on the base stand.  I decided to paint it red, for the same reason that i painted the welder cart red...it was what i had on hand.
painted, finished, red miter saw stand

Here's the wood welder cart that i made a couple months ago.  I used 2 coats of red paint and 2 coats of polyurethane and it turned out looking ok.
welding cart, wood, welder, wheels

Here's the base and arms during the painting process.  I hung them from the ceiling as i painted so that i could get to every side.
painting, hang from hooks, coats

Like i said earlier, i needed to find different wheels, and i ended up using these.  They are larger, stronger, and had a locking lever.  So it should be able to move easier and lock into place while i'm cutting.
miter saw stand on wheels, shop, move

And here is the final product with everything sanded, painted, and polyurethane.  Once again I decided to go with copper pipe because I thought it looked really good and I had some left over pipes lying around the basement.  After testing it, the pipe at that angle is definitely stronger enough hold up any weight that I need to cut.
wood miter saw stand, folding arms, on wheels, woodshop

 Another view with one arm folded in and one arm extended.
wood miter saw stand, folding arms, on wheels, woodshop

It actually turned out exactly how i was picturing it.  I still might put the shop vac underneath and hook a flexible pipe up to collect the shavings.  Or maybe i could just keep it even simpler and just use gravity to have the wood shavings drop through the pipe to a bucket.

how to build a miter saw stand, wood, easy, strong, folding, space saver

I think it turned out great for its space saving ability, although it's not super stable. Unfortunately with its narrow base, tall height, combined with the wheels, and all the weight being up top, it wobbles a bit.  It will definitely work for what I'm using it for, but if you ever wanted to remake this yourself I would recommend somehow extending the wheelbase.  Although that kind of defeats the purpose of having a compact miter saw stand.  Maybe i can put a heavy piece of steel in the base to keep it steady.
compact miter saw stand, wood, cheap

But overall I'm quite happy with how it turned out.  Now when i have to use it for a project i just have to wheel it out, fold out the arms and cut any board.  Then when i'm done with it, fold it up and tuck it back into the corner.